Turnigy TGY-20A TGY-30A Manual of Speed Controller for Brushed Motor HK0001-SM005ENG-20130511

I will post the Manuals for all ESC and motors that I use.  I didn't find this one online.  I tried saving as a PDF but it saved in the wrong direction.  Thus, it's a JPG file.

Read this manual carefully. It looks like there are two jumpers you will need to set to use the speed controller.   One for brake and one for battery type.

I assume no responsibility with what you do with this information.  If you crash your plane/drone or burn up your ESC because you plugged it into your LiPo battery without your motor, its not my problem.


This manual  is for a "Brushed Motor."  If your motor has three wire and you're trying to figure out how to get these two wires hooked up to it, you have the wrong speed controller.   Brushed motors have two two connections.  Brushless "outrunner" motors have three wire connections.  The bad news is you'll need the right speed controller. The good news is that you didn't burn up your motor figuring that out.

One last thing, check your motor carefully for the appropriate amperage required for your speed controller.  While you're at it, check it out for the correct propeller size for the motor.